M80 IRIS
maximum versatility, pure design

The linear and yet soft shapes of the M80 Iris profile make it perfect for any architectural environment. Versatile aesthetics, reflected in an equally wide choice of woods, finishes, accessories and glass thickness, from 26 to 43 mm, optimising both the outward appearance and the energy efficiency of the window.

Possible energy values
Value of frame and door Uf 1,12
Value of glass Ug 0,40
Thermal transmittance Uw 0,69 w/m²k
Quality is in the details:
M80 IRIS
  • A
    The GLULAM used, 80 mm thick and of great quality, ensures maximum resistance to deformation and has an optimal effect on thermal efficiency, with values up to Uf = 1.2.
  • B
    The water-based PAINTING cycle is performed with a first protective, colouring, anti parasitic and anti-mould dip impregnation. After that, an additional primer is applied, again by dipping. The subsequent phases are manual sanding and then two consecutive coats of water-soluble and breathable finish, resistant to UV rays.
  • C
    Axis 13 HARDWARE is then installed, certified with the RAL quality mark for maximum reliability and durability. Windows and doors feature tilt and turn, Level 2 anti-burglary mechanisms as standard, also with concealed hinges. Pivot hung and sliding opening systems are also available.
  • D
    The innovative aluminium DRIP is no longer embedded in the lower beam of the frame, but applied externally, for proper ventilation of the water collection compartment and moving out any possible thermal bridge. A version with wooden drip, harmonised with the frame, is also available.
  • E
    33.1BE+18gas+4 GLAZING (compliant with UNI 7697:2014) is standard, but dual-chamber triple-glazing up to 43 mm thick can also be installed, with ratios up to Ug = 0.4. To further improve performance, Warm Edge thermal ducts are also available. All glazing units are structurally fixed to the door and sealed on both sides with anti-aging silicone.
  • F
    3 SEALS are fitted along the entire perimeter, ensuring an optimum level of thermal and acoustic insulation. They are made with material particularly resistant to weather, UV, ozone and at temperatures from -40° to +100°.
  • G
    The French window is made with a single lower crosspiece, a big aesthetic improvement for greater brightness.
    The innovative lower stop profile with thermal cut in resin-aluminium, fixed to the floor, only 25 mm thick, meets the standards for architectural barriers.
    The seal is guaranteed by a triple stop with seals.
  • H
    The CENTRAL NODE for 2 door frames is made with the asymmetric section of the two uprights inside and the central band outside.
disegni_iris_sx
disegni_iris_dx